Brass Inline Check Valve
Flow design: Single
Mechanism and body design:Inline piston
Body material: Brass
Thread size: 1/4"IN
Products Specification
|
Product Name |
Brass inline check valve , male to male |
|
Flow design |
Single |
|
Mechanism and body design |
Inline piston |
|
Body material |
Brass |
|
Thread size |
1/4"IN |
|
Connection type |
Mnpt x Mnpt |
|
Cracking pressure |
1.0psi |
|
Mounting orientatio |
Horizontal, vertical |
|
Seal material |
PTFE |
|
Seat material |
brass |
|
Spring material |
Stainless steel |
|
Max pressure |
2000psi |
|
Size range |
1/8 1/4’’ 3/8’’ 1/2’’ |
|
Applicaton |
Instrumentation,precision measurements,production systems |
Products Description
brass inline check valve is a type of valve that allows the flow of fluid or gas in only one direction. It is designed to prevent backflow, which is the reversal of flow in a piping system. The valve is installed in-line with the piping, typically using threaded or compression fittings, and opens to allow fluid or gas to flow in the forward direction, while automatically closing to prevent flow in the reverse direction.
The brass construction of the valve provides durability and resistance to corrosion, making it suitable for use in a variety of applications including plumbing, irrigation, and HVAC systems. Brass is also a good conductor of heat, which allows for efficient transfer of heat in systems that require it.Huancheng brass inline check valve is a reliable and effective component in many piping systems that require the prevention of backflow.
To install a female to male inline check valve, follow these steps:
- Turn off the water supply: Before installing the check valve, turn off the water supply to the section of the pipeline where you want to install it.
- Prepare the pipeline: Use a pipe cutter or hacksaw to cut the pipeline where you want to install the check valve. Make sure the cut is straight and clean.
- Clean the pipeline: Use a wire brush or sandpaper to clean the ends of the pipeline where you cut it. This will ensure a tight seal.
- Apply Teflon tape: Wrap Teflon tape around the male threads of the check valve. This will ensure a tight seal and prevent leaks.
- Install the check valve: Screw the check valve onto the female end of the pipeline. Use a wrench to tighten it securely.
- Test the valve: Turn on the water supply and check for leaks. If there are no leaks, the check valve is installed correctly.
- Secure the valve: Use clamps or straps to secure the valve in place to prevent it from moving.
- Remember to follow the manufacturer's instructions and any local plumbing codes or regulations when installing a check valve. If you are unsure about how to install the check valve, consult with a licensed plumber or professional.
Packing & Shipping
Hot Tags: Brass Inline Check Valve, China, suppliers, manufacturers, factory, customized, wholesale, low price, in stock, solenoid valve, threaded pipe caps, copper pipe fittings, quality valve, corrugated pipe fittings, flanged end pipe fittings
Send Inquiry
