Stainless Steel Male Tee

1.Product Name : stainless steel male Tee

2.Body material :SS316/SS304/brass /carbon steel

3.Material under ASTM A-479 & ASTM A-182

4.Size :1/4’’NPT equal male

5.Technolog :Forging bar stock

6.Working Temperature： from -868 to 1472 degrees F/-500 to 800 degrees c.

7.Maximum Pressure: Maximum working pressure is 6000 psi

8.More description product Name :Threaded NPT Tee /male NPT tee /male stainless steel pipe tee /high pressure breathing air NPT fittings

Male street tee / reducing tee  /reducing fittings

Stainless steel male tee is widely used in chemical, health, food and other industries. Its advantages are applicable to different working environments and have good corrosion resistance.
High pressure can reach to max 6000psi ,using high precision roud bar stock stainless steel material easy to install and no leakage problem . with long service life ,safe and reliable performance ,
All fittings we will test thread by thread gauge ,test whether have leakage problem under water and gas situation. Finall all fittings we will deal with them no burr&Smooth edges. So that they will not hurt your hands

1.All pipe threads meet the requirements of ASME/ANSI B 1.20.1(1983) for tapered pipe threads (NPT).

NPT is a standardized fitting that is commonly used for joining pipe. Due to the tapered threads (wider diameter at the base of the threads, similar to a trapezoid) the male fitting will tighten the further it is threaded into the female.
NPT follows the technical standards provided by the American National Standard Pipe Thread standards, often called national pipe thread, which is often where the confusions with NPT arises, as NPT is specifically an acronym that refers to tapered pipe.

2.Working pressures calculated in accordance with Power Piping Code ANSI B31.1, Refiner Piping Code ASME/ANSI B31.3 and section VIII of ASME Boiler & Pressure Vessel Code. 

3.All of our product specifications are equivalent  to DK-LOK,HY-LOK,SWGAELOK .PARKER

4.Available in wide variety of configurations.

Stainless steel pipe fittings are used to change the direction of the flow of liquids and gases or connect different components in the piping system.
We have below type stainless steel pipe fittings for your choosing
 

Butt Weld Fittings
Type: Elbow, Tee, Cross, Reducer, Cap, Stub End, Weldolet
Size Range: 1/8″ to 36″ NPS
Thickness Schedule: Sch 10S, 20, 30, 40S, 80S, XS, 120, 160, XXS
Stainless Steel Grades: ASTM A403 WP304, 304L, 316, 316L
Socket Weld Fittings
Type: Elbow, Tee, Cross, Cap, Coupling, Boss, Union, Lateral, Sockolet
Size Range: 1/8″ to 4″ NPS
Pressure Rating: Class #3000, #6000, #9000
Stainless Steel Grades: ASTM A182 F304, 304L, 316, 316L,
Threaded Pipe Fittings
Type: Elbow, Tee, Cross, Cap, Coupling, Boss, Union, Plug, Bushing, Threadolet.
Size Range: 1/8″ to 4″ NPS
Pressure Rating: Class 2000, 3000, 6000
Stainless Steel Grades: ASTM A182 F304, 304L, 316, 316L

Hot Tags: stainless steel male tee, China, suppliers, manufacturers, factory, customized, wholesale, low price, in stock, equal pipe tees, blind flanges, rough bore pipe fittings, grooved pipe unions, flexible pipe couplings, flanged end pipe fittings