Two Way Valve Manifolds
Huancheng always committed to the development and research of high-quality valves and pipe fittings, and constantly learn from foreign mature technology and advanced technology!
The instrument 2-valve manifolds, 3-valve manifolds and 5-valve manifold produced by huancheng Valve are used for differential pressure transmitter and can supply instrument valve manifold for acid gas
Description:
Huancheng always committed to the development and research of high-quality valves and pipe fittings, and constantly learn from foreign mature technology and advanced technology!
The instrument 2-valve manifolds, 3-valve manifolds and 5-valve manifold produced by huancheng Valve are used for differential pressure transmitter and can supply instrument valve manifold for acid gas
Specification
Valve manifolds,stainless steel two way valve manifolds
Feature:
1.Prime,High Quality
2.Standards:NPT,BSPP,BSPT,ISO,DIN
4.Certificates:ISO9001
5.Brand Name: HC-VALVE
6.Place of Origin: Zhejiang, China (Mainland)
Details:
1.Max pressure up to 6000psig (414bar) for standard stainless steel body
2.Temperature for PTFE packing from -65°F to 450°F (-54°C to 232°C)
Temperature for Grafoil packing from -65°F to 1200°F (-54°C to 649°C)
PPL packing：-38℃ - 280℃ (-100℉ - 536℉)
3.100% factory tested
4.Orifice:0.157" (4.0mm),CV:0.35
5.valve design
● Two section valve stem design, upper valve stem thread is specially hardened
● The surface of lower valve stem is polished and hardened
● The valve stem has the function of being sealed when it is fully open
● The lubricating oil on the upper valve stem thread is isolated from the system medium
|
Product name |
Stainless steel two way valve manifolds |
|
Material |
316SS, 316LSS,304SS and other special materials |
|
Size |
Fractional Sizes from: 1/8" - 2" |
|
Nominal pressure |
Pressure from 6000 psig |
|
Other detail |
1) . Pressure from 10000 psig for high pressure series |
|
Test |
Each valve shall be sealed test with 7MPa nitrogen before delivery, and shall be sealed with 5% nitrogen at 1.5 times of rated working pressure |
|
Order Part Number |
Inlet/process |
Outlet/instrument |
Test /vent |
|
2VML08MF |
1/2’’NPT female |
1/2’’NPT male |
1/4’’NPT female |
|
2VML08M |
1/2’’NPT female |
1/2’’NPT male |
1/4’’NPT female |
|
Item |
Description |
Material |
QTY |
|
1 |
Body |
SS316 |
1 |
|
2 |
Gland body |
SS316 |
2 |
|
3 |
Gland retainer |
SS316 |
2 |
|
4 |
Washer |
SS316 |
2 |
|
5 |
packing |
PTFE |
4 |
|
6 |
Packing washer |
SS31 |
2 |
|
7 |
spindle |
Ss316 |
2 |
|
8 |
Lock nut |
SS316 |
2 |
|
9 |
Setting screw |
steel |
2 |
|
10 |
handle |
SS/alu p |
2 |
|
11 |
Lock pin |
Ss316 |
2 |
|
12 |
Dust cap |
Plastic |
2 |
|
13 |
Washer |
SS316 |
2 |
|
14 |
Vee tip |
17-4ph |
1 |
|
Features/benefits Forged one piece body construction: for high strength,non rotating vee 1. Rolled and plated stem threads for extra strength 2. Screwd bonnet with safety lock pin prevents accidental valve disassembly 3. Adjustable packing below threads Safety bonnet lock::Prevents accidental disassembly Stem thread rolled &hard plated :provides additional strength &maximum service life Mirrow finish stem, burnished to a 16RMS:Extends packing life and smoothens stem operation Adjustable packing below stem threads :Prevents stem lubrication washout and isolated threads from process contamination Safety back seating :provides secondary stem seal in full open position, prevents stem blowout Stainless steel handle : for hand actuation Body to bonnet seal : metal to metal constant compression ,isolated bonnet threads from system fluids And eliminates possible tensile |
1.What’s the feature of The 2-way valve pressure transmitter manifolds
A :Two valve manifold is used together with pressure transmitter or pressure gauge. Its function is to connect or cut off the positive and negative pressure chambers of the differential pressure transmitter from the pressure point, or to connect or cut off the positive and negative pressure chambers. Provide multi-channel for instruments, reduce installation workload and improve system reliability.
2. What is connection way for two way valve manifolds
A :Inlet female x outlet male
3. Does this two way valve manifolds has other type
A: pipe to square flange type , pipe to flange mount type. T type
4. Has MOQ if order ?
A: No MOQ , we can accept very small quantity
5. What’s your after-sales service If ordered?
A : We will provide test report ,material certificate , quality assurance .Finally if received our goods with any quality problem , our company can replaced them with free items cost and free air freight cost .
6.How to use and install stainless steel two way manifold valve
A :1. Preparation: The two-way manifold valve is made of stainless steel, so make sure that you wear proper protective gear when handling it, such as gloves and eye protection.
2. Mounting and Connection: First, mount the two-way manifold valve onto the piping system. Make sure that the diameter matches the pipes and that the screw holes are properly aligned. Secure the valve with appropriate bolts or screws. Connect the two-way valve to the inlet and outlet pipes with the appropriate fittings, such as reducer fittings or compression fittings.
3. Testing: Before using the two-way manifold valve, it is important to test for leakages. To do this, pressurize the system and check for any signs of leaks. If any leaks are evident, the valve should be tightened or the fittings should be replaced.
4. Maintenance: Regularly check the two-way manifold valve and the system for any signs of wear or damage. If any parts need to be replaced, make sure that they are of the same quality and type as the original ones. Also, clean the valve as needed to prevent any build-up of dirt or debris.
Packing & Shipping
Hot Tags: two way valve manifolds, China, suppliers, manufacturers, factory, customized, wholesale, low price, in stock, overpressure protection valve, pipe tees, pipe elbows, flexible pipe couplings, pipe caps, stainless steel high pressure pipe fittings importer
Send Inquiry
